Bleaching LED Light

Description

• DESCRIPTIONThe whitening device P1 is a new type whitening Technology, based on the condition of strong blue LED light and whitening kit accelerant. By the character of nanometer pellet on the surface and light decomposition, activate the most H2O2 in short order on low or normal temperature. Produce mass oxygen atomy, permeate teeth and decompose colour molecule, to meet the effect of teeth whitening.
      FEATURES(1) The specifical wavelength and high density light speed catalyze whitening gel.
  (2) 8 powerful LED beads emit a high intensive cold blue light with an output at           6000MW/cm².
  (3) Special design, innocuous silica gel muzzle, make sure stopping cross infection.
  (4) The new model of power supply make sure steady power output and long-time                                                   continuous    working even in some cities and places with mutative voltage.
  (5) Time display screen shows the whitening time clearly to the user.

             STRUCTURE AND PARTS

  (1). ON/OFF: Press the “ON/OFF” button to set the machine working (The power light and standby light on).
  (2). Time setting (UP/DOWN): According to patient’s condition, doctor can increase or decrease the time level from 1~20 mins.
  (3). PAUSE: Press this button to set the unit to standby mode. Ready indicator light is off, and standby indicator light is on.
  (4). START: Press this button to set the unit to start LED-luminescence.
  (5). HIGH/LOW: Press this button to choose light intensity as high mode (6000mw/cm²) or low mode (3000mw/cm²).

   TECHNICAL PARAMETERS

  Power Supply : AC100-240V,50/60HZ
  Power : 300W
  Clamping Size: 45~50cm
  Light Size: 18X74mm2
  Light intensity: >6000mw/cm²
  Light timing: 0~20mins
  Power instability: <1%
  Working method: timc Output & continuous working
  Coupling: Polyester monowave

   OPERATION

  (1). Connect power source and turn it on.
  (2). The machine is in stand-by after a prompt sound of buzzing. Position “1” would be showed glinting “20”.
  (3). Adjust the operation time by “time up/time down”, adjust range from 1 to 20 minutes.
  (4). Alarm sound after pressing “START”, and a strong blue light transmitted from the light guide of terminal, time display is counting down.
  (5). Alarm sound for 5 seconds after countdown finished, blue light extinguish.

   OPERATION NOTICE

  (1). Please don’t turn the power OFF immediately once blue light extinguished, the machine will turn to heat-emitting and cooling condition according to preset procedure.

  (2). Light guide terminal is made of the polyester material which is smooth and transparent. Please do not clean it with the incisive object.

  (3) Please don’t put heavy item on the power cable, and always keep the device far from heat source.

  (4) Turn it off without using it.

   OPERATION NOTICE

  (1). Dentist and patient should wear goggle during operation of the device

  (2).Always keep treatment room ventilated during operation of the device

  MAINTENANCE

  (1). Make regular back-check and keep machine surface clean.

  (2). This machine is precise optical equipment, it should be used in the clean and dry place without atomy .

  (3) Environment condition: no atomy, no shock, no dampness.

  (4) Treatment room temperature 16~20°C, humidity < 40%.

  (5) Clean up transparent head after each treatment by alcohol (avoid clean by sharp object), make sure it’s clean to avoid cross infection between patients. Silica gel muzzle can be sterilized.

  (6) If any “error” shown on the display, turn off power and stop operating immediately, ask for help or advice from professional technician.

   TRANSPORTATION AND STORAGE

  (1) Lay lightly during transportation, avoid strong shake.

  (2) Storage condition:
  a. Ambiance temperature: -40 ~ 55°C
  b. Relative humidity: < 95%

  MALFUCTION AND SOLVING METHOD

  No.	MALFUNCTION	RESOLVE
  1	Turn on the machine no working	a. Check if the power connect well b. Power is in bad condition, contact with supplier for help and advice
  2	Light out putport without voltage	a. Power is in bad condition, contact with supplier
  3	Light output power decline	a. Cross section of LED bulb is damaged b. LED bulb life expired, contact with supplier to exchange new one
  4	Light out port with voltage, but without light output	a. LED bulb is damaged, contact with supplier to exchange new one